Custom-engineered thermal insulation and protective aluminium & stainless steel metal jacketing for pipes, tanks, ducts and valves across Qatar and the UAE — built to international standards.
We provide heavy-duty metal jacketing for thermal piping, steam lines, chilled water networks, and cryogenic pipelines. Our team performs precision shop-fabrication of elbows, tees, and reducers to guarantee an airtight fit.
Each segment is rolled and crimped using state-of-the-art machinery, ensuring robust structural integrity and preventing water or saline air ingress.
Large-scale industrial storage tanks require specialized cladding to handle wind load stresses, thermal expansion, and weather exposure. We design and install complete cladding panels for vertical and horizontal storage tanks.
Our engineering team calculates the exact thermal expansion coefficients to integrate expansion joints, preventing buckling or warping of the metal sheets under the intense GCC temperature swings.
We design and install protective duct insulation and metal cladding for rectangular and round air ducts, exhaust systems, and ventilation shafts. Properly clad ductwork is essential for preventing energy loss and maintaining air quality in high-humidity coastal areas.
Our duct cladding shields the insulation from moisture, physical damage, and UV degradation, ensuring that chilled air remains cold as it traverses large industrial and commercial complexes.
Standard fixed cladding on valves, flanges, and pumps makes routine inspection and maintenance highly destructive. We fabricate custom, quick-release cladding boxes that can be removed and reinstalled in minutes.
These boxes are insulated internally with high-temperature blankets and fitted with heavy-duty stainless steel draw latches, providing excellent thermal protection while keeping critical components accessible.
We provide specialized thermal insulation and weatherproofing cladding for marine vessels, offshore oil rigs, and floating platforms. Our marine systems are engineered to withstand extreme saltwater corrosion, wave impact, and high humidity.
Using marine-grade Stainless Steel 316L and specialized anti-corrosive coatings, we ensure that engine exhausts, steam lines, and accommodation areas remain thermally isolated and protected.
High-noise industrial environments require effective sound attenuation. We design and install acoustic cladding systems for high-velocity piping, compressors, generator enclosures, and turbine exhaust ducts.
By combining heavy-barrier mass loaded vinyl, acoustic rockwool, and perforated metal jacketing, we significantly reduce noise levels, helping plants meet OSHA and local environmental noise regulations.
Choose the optimal cladding metal based on your facility's environmental and mechanical requirements.
| Specification / Property | Premium Aluminum | Stainless Steel 304 | Stainless Steel 316 (Marine) |
|---|---|---|---|
| Corrosion Resistance | Moderate (Forms protective oxide layer) | High (Resists organic chemicals) | Maximum (Resists saline & chloride environments) |
| Mechanical Strength | Moderate (Lightweight, easy to form) | Very High (Resists impact & wear) | Extreme (Resists high pressure & impact) |
| Temperature Limit | Up to 150°C | Up to 800°C | Up to 870°C |
| Solar Reflectivity | Highest (~90-95%) | Moderate (~60-70%) | Moderate (~60-70%) |
| Optimal Applications | District cooling, HVAC, urban pipelines, air ducts | Food processing, indoor steam lines | Refineries, coastal plants, chemical tanks |
| Relative Cost | Cost-Effective ($) | Premium ($$) | High-End ($$$) |
Answers to the questions engineers and procurement teams ask us most often across Qatar and the UAE.
Aluminium offers the highest solar reflectivity (90-95%) and is the most cost-effective choice for district cooling, HVAC and urban pipelines. Stainless steel 304 or 316 offers far higher mechanical strength and chemical/saline resistance, making it the standard for refineries, coastal plants, chemical tanks and marine applications. See our full material comparison table above.
CUI happens when moisture gets trapped beneath insulation and jacketing, silently corroding the pipe or vessel wall until it fails. Properly designed metal cladding with hermetically sealed lock-seams and silicone-sealed joints keeps moisture out entirely, which is why our systems report a 0% CUI rate across completed projects.
In most cases, yes. Because our segments, elbows and valve boxes are pre-fabricated off-site using 3D CAD and CNC roll-forming, on-site installation is fast and non-intrusive — typically reducing labor time and disruption by around 40% compared to manual on-site fabrication.
Yes. Our marine & offshore cladding service uses marine-grade Stainless Steel 316L engineered to SOLAS and IMCA safety standards, for vessels, offshore rigs and floating platforms across Qatar and UAE waters.
It depends on the application: aluminium is typically specified between 0.5mm and 1.0mm, while stainless steel 304/316 ranges from 0.4mm to 0.8mm. Our engineers size the exact gauge based on pipe/vessel diameter, wind load, and mechanical exposure during your project estimate.
From our Doha office we serve Ras Laffan, Mesaieed and greater Doha; from our Dubai office we serve Jebel Ali, Abu Dhabi and the wider UAE. See our project portfolio for examples across both markets.
Our engineering team can design custom cladding drawings matching your exact piping schematics. Calculate your requirements or contact an engineer.
